Distribution Amplifiers

Distribution Amplifiers

Distribution amplifiers serve to direct the output of GPS disciplined oscillators to multiple outputs, with minimal degradation of the input signals along the way. Novus 10 MHz distribution amplifiers offer minimal phase noise contribution, skewing and are robust enough to withstand transients and faults. Novus frequency reference distribution amplifiers are factory configurable to operate from 100 kHz to 50 MHz. Available in modular and rackmount from 3 to 20 channels.

10 Channel 10MHz Frequency Reference Distribution Amplifier-ND0100-R

10 Channel 10MHz, 5MHz Frequency Reference Distribution Amplifier
SKU : ND0100-R


Ten channel, low-noise GPS DO frequency reference distribution amplifier. Ten identical amplifiers feature skew of ~ 5 ns. Each channel independently monitored for load impedance mismatch with independent warning indicators on the front panel. Outputs are transient and short circuit protected. Harmonic distortion well below -30 dBc. Minimal additive phase noise.  While primarily used as a 10 MHz distribution amplifier frequently used with Novus GPS disciplined oscillators, options are available to handle reference signals from 1 to 10MHz.

  • 1 to over 10 MHz
  • Minimal phase noise contribution to the GPSDO frequency reference (-150 dBc/Hz @ 1kHz) Harmonics <-30dBc.
  • Front panel signal frequency reference amplitude indicators.
  • Fault indicators for each output. High impedance (Z>1 KOhm)
  • Internal self-test drives indicators and alert signal.
  • All inputs and outputs fault and transient protected.

Brand : Novus          SKU : ND0100-R

Need SNMP-Remote monitoring- lower phase noise? See the NR2310D-R


Distribution Amplifiers
Frequency Reference Distribution Amplifier
AC Powered, DC Powered, Low Noise, 10 MHz, 5 MHz, Distribution Amplifier, Rack Mount

Product Inquiry Form

    Your Name (required)

    Your Email (required)

    Inquiry Product Name

    Your Message