GNSS GPS Pole Mount Antenna for Your 10 MHz Frequency Reference System

NA103A

The NA103A permanent mount GNSS GPS value active antenna provides 28 dB gain and great out-of-band rejection performance. It features a precision tuned custom ceramic patch element for maximum signal reception and 15KV ESD circuit protection. This minimizes GPS loss-of lock even when conditions are less than ideal. Weather proof, all-plastic, non-corrosive low profile package.

AC Power Adapter for Modular Frequency References

PA-17

Low noise 12 Watt, 12Vdc power adapter selected to operate a range of Novus 10 MHz frequency references, distribution amplifiers and related products. Unit will operate from 90 to 264Vac, 50/60 Hz sources. Hiccup short circuit protection prevents overheating. Fused at 1 Amps. Less than 250 mV of ripple. The unit is shipped with the connector compatible with the product to be powered. International plug adapter set available.

Novus shock and water resistant cases allow you to take your 10 MHz frequency reference where it is needed. Enough room for cables and power adapters.

GNSS Antenna Supports L1 and L2 Bands for Advanced Frequency References

NA107

The NA107 GNSS active antenna provides 20 dB gain and excellent out-of-band rejection performance. It features a precision tuned custom ceramic patch element for maximum signal reception and 15KV ESD circuit protection. This minimizes GPS loss-of lock even when conditions are less than ideal. Weather proof, all-plastic, non-corrosive low profile package.

GNSS Magnetic Mount Active Antenna

NA0106

The NA0106 GNSS GPS active antenna is a high performance GPS active antenna. Using internal magnets, the antenna can be installed almost anywhere. The antenna features 28 dB gain low noise amplifier and a SAW filter.

Also available  in our GPSDO kits

GNSS Antenna Lightning Arrestor

NC10

The Novus NC10 lightning arrestor is a bi-directional gas discharge tube suppressor that features wide-band operation up to 6 GHz and is rated at IP67.

NV series

The Novus NV series high performance isolators were designed to minimize phase noise contribution due to mechanical shock and vibration. The low durometer silicone elastomer has combination of strength and elasticity which provides excellent low frequency attenuation of more that 20 dB at 60 Hz to reduce fan induced phase noise. Many Novus high performance references use the NV series of isolators to minimize mechanically induced phase noise.

The silicone elastomer can be molded to a variety of male or female stainless-steel inserts.  Available insert thread sizes include #2, #4, #6, #8, #10, M2, M2.5, M3, M4, M5, or M6. Excellent temperature range from -55° C to +125°C.